Hantek 4CH 70MHz MSO5074FG Mixed Singal Oscilloscope with 8 Channels Logic Analy

The shipment is about 5-7 working days, 3 years warranty


Feature

•4 Channel Oscilloscope+8 Channel Logic Analyzer + 25MHz Arb. Waveform Generator(Only MSO5074FG).
•Abundant Trigger type: Video, Edge, Slope, Pluse Width, Overtime, Alternative, Code-type, Duration, Queue, Repeat trigger.
•Large 7 inch 64K color Display, WVGA: 800*480.
•USB host and device connectivity, standard.
•Ultrathin desigh, handy volume, easily portable.
•VGA Optional

Oscilloscope

•1Gsa/s Real Sample Rate;
•4 Channels Oscilloscope;
•70MHz Bandwidth, 1M Record Length;
•32 automotive measurement and FFT Analysis for Simplified Waveform Abalysis.
Logic Analyzer

•8 Channles Logic Analyzer;
•500MHz Sample Rate
•1MRecord Length
Arb. Waveform Generator(Only MSO5074G)

•25MHz Arb. Waveform Generator Output(Sine wave up to 75MHz)
•200MSa/s Sample Rate;
•12bit Pattern Generator
•50MHz Frenquery Counter

Model	MSO5074F	MSO5074G
Channel	4
Bandwidth	70MHz
Rise Time	5ns
Real time sample rate	1GSa/s
Record Length	1M
SEC/DIV Range	4ns/div~40s/div
Delay time Accuracy	500ps
A/D Converter	8bit resolution
Volts/div range	2mV/div~ 5V/div at input BNC
Position Range	20ns/div to 80us/div; (-8div x s/div) to 40ms; 200us/div to 40s/div; (-8div x s/div) to 400s;
DC Gain Accuracy	±3% for Normal or Average acquisition mode, 5V/div to 10mV/div; ±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div
Input
Inputs Coupling	AC, DC, GND
Inpits Impendance	1MΩ±2% ‖20pF±3pF
Probe Attenuation	1X, 10X
Trigger System
Trigger Types	Edge, Video, Pulse, Slope, Over time, Alternative
Trigger Source	CH1, CH2, EXT, EXT/5, AC Line
Trigger Modes	Auto, Normal, Single
Coupling Type	DC, AC, Noise Reject, HF Reject, LF Reject
Trigger Sensitivity (Edge Trigger Type)	DC(CH1,CH2, CH3, CH4): 1div from DC to 10MHz;1.5div from 10MHz to Full; DC(EXT): 200mV from DC to Full; DC(EXT/5):1V from DC to Full;    AC: Attenuates signals below 10Hz     HF Reject: Attenuates signals above 80kHz； LF Reject: Same as the DC-coupled limits for frequencies above 150kHz; attenuates signals below 150kHz
Trigger Level Range	CH1, CH2, CH3, CH4: ±8 divisions from center of screen;  EXT: ±1.2V; EXT/5:±6V
Trigger Level Accuracy( typical) signals having rise and fall times ≥20ns	CH1, CH2, CH3, CH4: 0.2div × volts/div within ±4 divisions from center of screen; EXT: ± (6% of setting + 40mV); EXT/5: ± (6% of setting + 200mV);
Set Level to 50%(typical)	Operates with input signals ≥50Hz
Measurement
Cursor Measurement	Manual: Voltage difference between cursors: △V              Time difference between cursors: △T              Reciprocal of △T in Hertz (1/ΔT); Tracing: The valtage and time at a waveform point;
Auto Measuerment	Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot, BWIDTH,  FRF
Math	+, -, *, /, FFT
Logic Analyzer Specifications
Channels	8 Channels
Max. Input Impendence	200K(C=10p)
Input Voltage Range	0V~3V
Logic Threshold Range	0V~3V
Max. Sample Rate	500MSa/s
Compatible Input	TTL, CMOS, ECL
Sample Depth	1M
Edge Trigger	D0-D7 select slope (rising or falling edge)
Pulse Width Trigger	D0-D7 select pulse polarity (positive or negative pulse), trigger when (=, ≠, >, <), trigger pulse width
Code-type Trigger	D0-D15 select code-type (H, L, X)
Duration Trigger	D0-D7 select persist time and trigger when (data terminate, data start, and data delay)
Queue Trigger	D0-D7 select specific data index (0-3) and code-type (H, L, X)
Repeat Trigger	D0-D7 select code-type (H, L, X) and repeat times
Arb. Waveform Generator Specifications (MSO5074FG)
Wave frequency	DC~25MHz
DAC clock	2K~200MHz adjustable
Waveform Length	4KSa
Vertical Resolution	12 bit
Frequency stabilization	<30ppm
Amplitude	±3.5V Max.
Output impedance	50 Ω
Output  current	50mA Ipeak=50mA
System Bandwidth	25M
Wave distortion	-50dBc(1KHz),  -40dBc(10KHz)
Frequency area	DC~50MHz
Input Amplitude	400mVpp~18Vpp
Coupling	DC
Frequency precision	±Time Base Error ±1 Count
input impedance	> 100KΩ
Pattern Generator	12Bit
General Feature
Supply Voltage	100-120VACRMS(±10%), 45Hz to 440Hz, CATⅡ 120-240VACRMS(±10%), 45Hz to 66Hz, CATⅡ
Power Consumption	<30W
Display Type	7 inch 64K color TFT LCD,(WBGA 800*480)
Size & Weight	385*200 * 245(mm), 3.5kg

Tell us what you think about this item and share your opinions with other people. Please make sure your review focuses only on this item. All reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.

After-sales questions and issues: Contact our Customer Service Department. (A customer representative will get back to you).

Please Sign In first if you want to later edit or manage reviews uploaded by yourself.

* Rating:

    Please select rating stars.

* Your First & Last Name:

pls select Mr. Ms.

* Your E-Mail Address:

* Review Title:

* Review Detail: