Hantek MSO7304BLG 4 Channel Oscilloscope 300MHz 2Gsa/s with 25MHz Arbitrary Signal Generator + Logic Analyzer

Item No.:MSO7304BLG
The item is located in Sydney, Australia and we ship to you only 4-5 days, 3 years warranty. No shipping cost, no value
added tax
Buy it Now: AUD1,569.00   FREE Shipping
Quantity :
         Sub Total: AUD1,569.00
Manufacturer Specifications:
  • 4 Channel Oscilloscope+8 Channel Logic Analyzer + 25MHz Arb. Waveform Generator(MSO5074FG).
  • Abundant Trigger type: Video, Edge, Slope, Pluse Width, Overtime, Alternative, Code-type, Duration, Queue, Repeat trigger.
  • Large 7 inch 64K color Display, WVGA: 800*480.
  • USB host and device connectivity, standard.
  • Ultrathin desigh, handy volume, easily portable.


  • 2Gsa/s Real Sample Rate;
  • 2/4 Channels Oscilloscope;
  • 80-300MHz Bandwidth, 32K Record Length;
  • 32 automotive measurement and FFT Analysis for Simplified Waveform Abalysis.

Logic Analyzer

  • 8 Channles Logic Analyzer;
  • 500MHz Sample Rate
  • 32KRecord Length

Arb. Waveform Generator

  • 25MHz Arb. Waveform Generator Output(Sine wave up to 75MHz)
  • 200MSa/s Sample Rate;
  • 12bit Pattern Generator
  • 50MHz Frenquery Counter
Function Pictures:


Model MSO7302BLG
Bandwidth 300MHz 200MHz 100MHz 80MHz
Real Sample Rate 2GSa/s
Memory Depth 32K
Timebase Ranges/div 2ns/div-40s/div 4ns/div-40s/div
Delay time Accuracy 500ps
Vertical System
Vertical Resolution 8bit
Volts/div Range 2mV/div5V/div 
Position Range ±50V(5V/div),±40V(2V/div500mV/div),
Rise Time 1.2ns 1.8ns 3.5ns 4.4ns
DC Gain Accuracy ±3% for Normal or Average acquisition mode, 5V/div to 10mV/div;
±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div
Trigger System
Trigger Types Edge, Video, Pulse, Slope, Over time, Alternative
Trigger Source CH1, CH2, EXT, EXT/5, AC Line
Trigger Modes Auto, Normal, Single
Trigger Sensitivity
(Edge Trigger Type)
DC(CH1,CH2,CH3,CH4): 1div from DC to 10MHz; 1.5div from 10MHz to 100MHz; 2div from 100MHz to Full;
AC: Attenuates signals below 10Hz ;
HF Reject: Attenuates signals above 80kHz;
LF Reject: Same as the DC-coupled limits for frequencies above 150kHz; attenuates signals below 150kHz   
Trigger Level Range CH1, CH2,(CH3, CH4): ±8 divisions from center of screen; 
EXT: ±1.2V;
Trigger Level Accuracy CH1, CH2,(CH3, CH4): 0.2div × volts/div within ±4 divisions from center of screen;
EXT: ± (6% of setting + 40mV);
EXT/5: ± (6% of setting + 200mV);
Holdoff Range 100ns-10s
Cousor Measurement Manual: Voltage difference between cursors: V
             Time difference between cursors: 
             Reciprocal of 
T in Hertz (1/ΔT);
Tracing: The valtage and time at a waveform point;
Auto Measurement Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot, BWIDTH,  FRF
Math +, -, *, /, FFT
Logic Analyzer
Channels 8 Channel
Max. Input Impendence 200K(C=10p)
Input Voltage Range 0~3V
Logic Threshold Range 0~3V
Max. Sample Rate 1GSa/s
 Compatible Input TTL, CMOS, ECL
Sample Depth 32K
Arb. Waveform Generator
Wave frequency DC~25MHz
DAC clock 2K~200MHz adjustable
Frequency Accury 0.10%
Waveform Length 4KSa
Vertical Resolution 12Bit
Frequency stabilization <30ppm
Amplitude ±3.5V Max.
Output impedance 50 Ω
Output  current 50mA Ipeak=50mA
System Bandwidth 25M
Wave distortion -50dBc(1KHz),  -40dBc(10KHz)
Frequency area DC~50MHz
Input Amplitude   400mVpp~18Vpp
Coupling DC
Frequency precision ±Time Base Error ±1 Count
input impedance > 100KΩ
Pattern Generator 12Bit
General Feature
Display 7 inch 64K color TFT LCD,(WBGA 800*480)
Supply Voltage 100-120VACRMS(±10%)45Hz~440HzCAT;
Power Consumption <30W
Fuse 2A, T rating, 250V
Demension & Weight 313mmx108mmx142mm; 2.5KG
Write a Review

Tell us what you think about this item and share your opinions with other people. Please make sure your review focuses only on this item. All reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.

After-sales questions and issues: Contact our Customer Service Department. (A customer representative will get back to you).

Please Sign In first if you want to later edit or manage reviews uploaded by yourself.

* Rating:
    Please select rating stars.
* Your First & Last Name:
* Your E-Mail Address:
* Review Title:
* Review Detail:
Stay Tuned!
Get updates on sales and discount offers.